Spitfire Flash Codes

Last Updated: Feb 25, 2015 01:41PM EST

SPITFIRE FLASH CODES


Flash Code Possible Cause Solution
1 The battery needs charging or there is a bad connection to the battery                              Check the connections to the battery. If the connections are good, try charging the battery.
2 There is a bad connection to the motor. Check all connection between the motor and the controller.
3 The motor has a short circuit to a battery connection. Test the motor.
4 Not Used  
5 Not Used  
6 The controller is being inhibited from driving. Check the battery charger connector. Disconnect the battery charger.
7 A throttle control fault. Make sure the throttle control is in the at rest position before switching on the Spitfire. Adjust if needed.
8 A controller fault is indicated. Make sure all connections are secure.
9 The electro magnetic brake has a bad connection. Check the electro magnetic brake and motor connections. Make sure the controller connections are secure.
10 Excess voltage has been applied to the controller. Check the battery connections. This is usually cause by a poor battery connection.
 
Did you find this article helpful?
149e5104a5a77a70d5d98654f32e7ebbe@drivemedical.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete