When the Falcon controller senses a fault, first there will be two short beeps to indicate that an error has occurred.
Then the Falcon will beep one to six times to indicate the error.
|| Possible Reasons and Solutions
The battery voltage has dropped below a set value.
|2, 3 or 4||Controller Fault||
Check the controller connections and wiring.
The throttle is misadjusted.
Test and adjust the throttle.
Replace the throttle if it cannot be adjusted.
Brake is disengaged, engage the brake, turn the scooter off for 5 seconds.
Check the brake connections and wiring.
Test the brake.