Daytona GT Flash Codes

Last Updated: Feb 25, 2015 01:28PM EST



When the CTE controller senses a fault a number battery indicator LED lights will flash.


 

  Flash   
 

  Meaning
 

  Possible Reasons and Solutions
 
  1   Low Battery  
  The battery voltage has dropped below a set value.
 
  2 Low Battery  

  The battery voltage has dropped below a set value.

 
  3   High Voltage

  The batteries are overcharged.
  If driving downhill slow down and turn lights on, if so equipped.
  Test the charge to ensure that it cuts off when batteries are fully charged.

 
  4   Motor Fault

  The motor current has been at the maximum value too long.        
  The motor may not be strong enough for the terrain (terrain to steep).
  The wheels may be rubbing on the frame.
  The motor may be faulty.
  Test the motor.
  Check the motor brushes.
  The controller overheats.
  Turn the scooter off and let controller cool down.

 
  5   Brake Fault

  Brake is disengaged, engage the brake, turn the scooter off for 5 seconds.
  Check the brake connections and wiring.
  Test the brake.

 
  6   Throttle Fault  

  The throttle is misadjusted.
  Test and adjust the throttle.
  Replace the throttle if it cannot be adjusted.


 
  7   Throttle Fault

  Throttle was engaged when unit was turned on.
  Turn unit off  for 5 seconds and turn on without engaging the throttle.

 
  8   Motor Fault

  Check the motor connections and wiring.
  Check the motor brushes.
  Test the motor.

 
  9   Controller Fault 

 Check the controller connections and wiring.
 Replace the controller


               
Did you find this article helpful?
149e5104a5a77a70d5d98654f32e7ebbe@drivemedical.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete