Bobcat Flash Codes

Last Updated: Feb 25, 2015 01:44PM EST

Possible Reasons and Solutions
1-1     Thermal Fault     
 The motor current has been at the maximum value too long.        
   *The motor may not be strong enough for the terrain (terrain to steep).
  *The wheels may be rubbing on the frame.
 The motor may be faulty.
  *Test the motor.
  *Check the motor brushes.
 The controller overheats.
  *Turn the unit off and let controller cool down.

1-2 Throttle Fault
 Check the throttle wiring and connection.     
   *Test the throttle.
  *Replace the throttle if  defective.

1-3 Speed Pot Fault
 Check the speed pot wiring and connection.
  *Test the speed pot.
  *Replace the speed pot if defective.

1-4 Low Voltage
 Check the battery cables and connections.
   *Charge the batteries.

1-5 High Voltage
 Batteries are overcharged.
  *If driving downhill slow down and turn lights on, if so equipped.
  *Test the charge to ensure that it cuts off when batteries are fully charged  

2-1 or
2-2 or
Main Faults
 Check the controller wiring and connection.
  *Replace the controller.

3-1 Throttle Fault
 The throttle is misadjusted.
 *Test and adjust the throttle.
  *Replace the throttle if it cannot be adjusted.

3-2 or
Brake Fault
 The brake is not engaged.
 *Engage the brake.
  *Check the brake wiring and connections.
  *Test the brake.
  *Replace the brake if defective.

3-3 or
Throttle Fault
 Throttle was engaged when unit was turned on.
  *Turn unit off and turn on without engaging the throttle.

4-1 or
4-2 or
Motor or

 The motor has a short
  *Check the motor wiring and connections.
  *Check the motor brushes.   
  *Replace the motor.
 The controller has failed.
  *Check the controller wiring and controller.
  *Replace the controller.

Did you find this article helpful?
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found